WOOD RESEARCH Volume 63, Number 4, 2018
Mária Fišerová, Elena Opálená, Juraj Gigac, and Monika Stankovská

Oxidative and reductive bleaching of deinked pulp

Deinked pulps for hygienic paper production were bleached with hydrogen peroxide and sodium dithionite in single and two-stage bleaching. The brightness gain of high brightness deinked pulp in the peroxide stage was 5.7% ISO and of low brightness 4.4% ISO. In sodium dithionite stage, the brightness gain of high brightness deinked pulp was 4.0% ISO and of low brightness deinked pulp 3.8% ISO. The two-stage oxidative-reductive bleaching sequence resulted in an increase of brightness by 9.7% ISO for high brightness deinked pulp and by 9.1% ISO for low brightness deinked pulp. Brightness gain in the two-stage reductive-oxidative bleaching sequence was 6.7% ISO for high brightness deinked pulp and 5.6% ISO for low brightness deinked pulp. The coordinate b* value and yellowness of deinked pulps decreased in sodium dithionite bleaching stage more than in hydrogen peroxide stage. The two-stage oxidative-reductive bleaching sequence is more preferred than reductive-oxidative sequence regardless of the fibre composition. The tensile index and the tensile energy absorption index of deinked pulps slightly decreased after single-stage and two-stage bleaching sequences, their reduction in the peroxide stage was greater than in the dithionite stage. The fibre strength and fibre length characteristics of deinked pulps decreased after bleaching, while fibre bonding ability increased. The water absorption and bulk softness increased after bleaching, the increase was higher after peroxide stage than dithionite stage.

WOOD RESEARCH Volume 66, Number 3, 2021
Ahmet C. Yalinkilic, Eyup Aksoy, Musa Atar, Hamza Cinar, and Hakan Keskin

Eco-design: Impacts of bleaching chemicals and varnishes on the amount of carbon dioxide in the combustion of oriental beech (Fagus orientalis Lipsky)

This study was carried out to determine the effects of bleaching chemicals and varnishes on the amount of carbon dioxide (CO2) in the combustion of oriental beech (Fagus orientalis Lipsky). For this purpose, samples of Oriental beech prepared according to ASTM D 358 contain 18% R1 = (NaOH + H2O2), R2 = (NaOH + Ca(OH)2 + H2O2), R3 = (Na2S2O5 + H2C2O4), R4 = (NaSiO3 + H2O2), R5 = (KMnO4 + Na2S2O5 + H2O2) solution groups, after bleaching with solution groups, water based, synthetic, polyurethane and acrylic varnish were applied according to ASTM D 3023 and combustion tests were carried out in accordance with ASTM E 160-50. Gas measurements were made with the SIGMA 74172 NSU flue gas device during the combustion process. As a result, in respect to the burning types; the highest amount of CO2 (ppm) was found in the self-combustion (8.468 ppm) while the lowest was obtained from the flame combustion source (4.599 ppm). In respect to the types of bleaching; the highest in R5 (7.458 ppm) and the lowest in R3 (4.059 ppm) were found. According to the varnish types; the highest value was found in the synthetic varnish (8.261), and the lowest value was found in the acrylic varnish (4.772 ppm). According to combustion type + bleaching solution + varnish type interaction, the highest values were found for without flame combustion (II) + R3 + Sn (18.40 ppm) and lowest for flame source combustion (I) + R5 + Pu (0.600 ppm). Consequently, the highest values for combustion gases were found in samples of oriental beech wood samples treated with water-based varnish with R1 solution. According to this, in terms of human health and life safety, possibility of fire in places, R3 solution and acrylic varnish may be used in the related industries.