WOOD RESEARCH Volume 63, Number 4, 2018
Mária Fišerová, Elena Opálená, Juraj Gigac, and Monika Stankovská

Oxidative and reductive bleaching of deinked pulp

Deinked pulps for hygienic paper production were bleached with hydrogen peroxide and sodium dithionite in single and two-stage bleaching. The brightness gain of high brightness deinked pulp in the peroxide stage was 5.7% ISO and of low brightness 4.4% ISO. In sodium dithionite stage, the brightness gain of high brightness deinked pulp was 4.0% ISO and of low brightness deinked pulp 3.8% ISO. The two-stage oxidative-reductive bleaching sequence resulted in an increase of brightness by 9.7% ISO for high brightness deinked pulp and by 9.1% ISO for low brightness deinked pulp. Brightness gain in the two-stage reductive-oxidative bleaching sequence was 6.7% ISO for high brightness deinked pulp and 5.6% ISO for low brightness deinked pulp. The coordinate b* value and yellowness of deinked pulps decreased in sodium dithionite bleaching stage more than in hydrogen peroxide stage. The two-stage oxidative-reductive bleaching sequence is more preferred than reductive-oxidative sequence regardless of the fibre composition. The tensile index and the tensile energy absorption index of deinked pulps slightly decreased after single-stage and two-stage bleaching sequences, their reduction in the peroxide stage was greater than in the dithionite stage. The fibre strength and fibre length characteristics of deinked pulps decreased after bleaching, while fibre bonding ability increased. The water absorption and bulk softness increased after bleaching, the increase was higher after peroxide stage than dithionite stage.

WOOD RESEARCH Volume 66, Number 3, 2021
Monika Stankovská, Mária Fišerová, Juraj Gigac, and Elena Opálená

Effect of addition of deinked pulp to bleached kraft pulp on tissue paper properties

The influence of addition of deinked pulps with low and high brightness to bleached eucalyptus and pine kraft pulps on functional tissue paper properties was studied. Deinked pulps with low and high brightness had some different functional properties. Deinked pulp with high brightness has higher bulk, porosity, water absorption after immersion, initial water absorption, bulk softness as well as brightness. On the contrary, the difference in relative bonded area and porosity e between deinked pulps with low and high brightness was moderate. The mixed pulps laboratory pulp sheets from bleached eucalyptus kraft pulp or bleached pine kraft pulp with addition of 20, 40 and 80% of deinked pulp with low brightness or deinked pulp with high brightness were prepared. The addition of the deinked pulp with high or low brightness to bleached kraft pulp leads to increasing of bulk, bulk softness as well as high water absorption after immersion and initial water absorption. The tensile index rapidly decreased by the addition of deinked pulps with high brightness to bleached eucalyptus and pine kraft pulps. Similarly, the addition of deinked pulp with low brightness to bleached pine kraft pulp led to rapid decreasing of tensile index. On contrary, with the addition of deinked pulp with low brightness to eucalyptus kraft pulp, the decreasing of tensile index was less pronounced. Mixed pulp from bleached eucalyptus kraft pulp with a small content of deinked pulp with low brightness with functional properties suitable for production of tissue papers was found as optimal.