WOOD RESEARCH Volume 66, Number 6, 2021
Mohammad Dahmardeh Ghalehno, Babak Nosrati Sheshkal, Farhad Kool, Miha Humar, and Mohsen Bahmani

Characterization of anatomical, morphological, physical and chemical properties of konar (ziziphus spina-christi) wood

The goal of this research is to investigate some morphological (fibre length, fibre diameter, cell wall thickness, Runkel coefficient, flexibility coefficient, slenderness coefficient, rigidity coefficient, Luce’s coefficient, solid coefficient), physical (dry wood density, volumetric shrinkage) and chemical (cellulose, hemicellulose, lignin, ash and acetone soluble extractives contents) composition of Konar (Ziziphus spina-christi) wood grown in Hormozgan province, Iran. For this purpose, three normal trees were selected randomly and a disk was cut from each one at breast height. Anatomical inspection revealed that the species was diffuse porous, with distinctive growth rings, simple preformation plate, with polygonal openings, and banded or diffuse-in aggregates parenchyma. The average values of wood dry density, fiber length, fiber diameter, cell wall thickness, Runkel coefficient, flexibility coefficient, felting coefficient, Luce’s coefficient, solid coefficient, rigidity coefficient were 0.926, 52.1, 77.85, 0.57, 163 ×103 μ3 and 0.48. Cellulose, hemicellulose, lignin, acetone soluble, extractives, ash contents were 43.34, 19.98, 33.9, 6.42 and 2.78%, resp.

WOOD RESEARCH Volume 61, Number 6, 2016
Birol Üner, Kenan Kömbeci, and Mehmet Akgül

The utilization of tomato stalk in fiber production: NAOH and CAO pulping process

This study was conducted to explore the utilization of tomato stalk in the paper industry. Fiber morphology of the material was determined according to standard test methods and average fiber length was found to be 980 μm and the width of the fiber was 15 μm. As a result, slenderness ratio was resolved to be around 60. This was considered to be comparable fiber with the most of the hardwood species. Tomato stalks were cooked with soda and lime in a separate process. Screened pulp yield was determined to be 35-45 %. Soda pulp of tomato stalks showed good mechanical properties when temperature raised to 135ºC and low alkali concentration (10 %) and lime pulps showed properties as well as that soda pulp at 135ºC and high alkalinity ratio (30 %).

WOOD RESEARCH Volume 64, Number 2, 2019
Ngargueudedjim Kimtangar, Guersoube Tao, and Guy Edgard Ntamack

Study of the correlation between fiber and mechanical properties of wood Borassus aethiopum Mart. of chad

Palmyra palm (Borassus aethiopum Mart.) is a large palm tree whose wood is often used for its mechanical resistance and weathering in buildings in Africa. In this work, the influence of fibre characteristics on the mechanical properties of wood was studied. For this purpose, the mechanical characteristics were determined and study of the micrograph of the sapwood and Duramen which are the useful parts of this wood were carried out. The results of this study show the mechanical properties of the palmyra are very influenced by the number and the mechanical characteristics of the fibres. The proposed polynomial model of the evolution of the mechanical characteristics gives the good results because the maximum relative mistakes of the prevision are 4.43% for the breaking strength and 0.40% for the Young’s modulus.