WOOD RESEARCH Volume 61, Number 2, 2016
Piotr Mańkowski, Paweł Kozakiewicz, and Michał Drożdżek

The selected properties of fossil oak wood from medieval burgh in Płońsk

Oak wood is characterized by a high resistance to effects of biotic factors and thereby it is often found in archaeological excavations. While lying over many years in the wet environment, the wood turns black as a result of reaction with iron compounds. Archaeological oak is a valuable raw material. In this paper selected mechanical and chemical properties of a thousand years archaeological oak were investigated. Then the archaeological oak properties were examined and compared with the contemporary oak wood. Archaeological oak wood as well as contemporary oak wood has a directly proportional relationship between MOE (modulus of elasticity) and wood density, and similar relationships between wood density and compressive strength, bending strength, content of mineral substances. Contemporary wood of the same density as the archaeological oak wood would show significantly higher mechanical properties.

WOOD RESEARCH Volume 66, Number 3, 2021
Hasan Hüseyin Taş, Bilge Arslan, and Hülya Kalaycıoğlu

Effects of polymer additives on some mechanical and physical properties of cement bonded particleboards

The effects of some polymer additives, also called super plasticizers, on selected physical and mechanical properties of cement bonded particle board were investigated. Two different kinds of poly carboxylic ether (PF300, DX40) and a melamine based polymer (300M) were added to the wood cement mixture. The ratios of polymer additives to the wood cement mixture were 1%, 1.2% and 1.4%. Cement bonded particleboards were manufactured with wood/cement (w/w) ratio of 1:3; target density of 1300 kg.m-3, and CaCl2 content of 5%. The cement bonded particleboards were tested for water absorption (2 and 24 hour), thickness swelling (2 and 24 hour), bending stiffness and strength and internal bond strength. Results of the study showed that most of the polymer addition decreased water absorption and thickness swelling of the boards. Replacement of cement with polymers increased internal bond strength and bending stiffness of the boards while bending strength was slightly reduced. Use of small amount of super plasticizers significantly improves most of the board properties.