The influence of thermal modification on the resistance to water impact properties and strength of wood used in outdoor conditions

In this study the influence of thermal modification on the resistance of wood to the impact of water and mechanical properties and to compare the durability of thermally modified and coated wood products operating in wet conditions was investigated. It was found that the weight of thermally unmodified non-coated oak wood after 48 h of soaking increased on average up to ~ 15%, and the weight of coated oak wood increased up to ~ 8%. If wood was thermally modified, the weight of non-coated oak wood increased up to ~ 9%, and the weight of coated oak wood increased up to ~ 5%. After 168 h of soaking these change is about 2 times larger. In the case of pine wood compared to oak wood these change of weight after 48 h is about 2.0 – 2.4 times and after 168 h about 1.4 – 2.0 larger. It can be stated that wooden constructions intended to be used in very wet conditions should be made of thermally modified wood without coating. Thermally modified wood will have greater dimensional and shape stability. Thermal modification reduces the swell up to 1.6 times in the case of oak, more than 2 times in the case of pine.