WR2020 02: 01-15 WR 202002
Contents:download1. HAMID R. TAGHIYARI, AYOUB ESMAILPOUR, STERGIOS ADAMOPOULOS, KUROSH ZERESHKI, REZA HOSSEINPOURPIA:Shear strength of heat-treated solid wood bonded with polyvinyl-acetate reinforced by nanowollastonite. 183doi.org/10.37763/wr.1336-4561/65.2.1831942. MOHSEN BAHMANI, LEILA FATHI, GERALD KOCH, FARHAD KOOL, HAMED AGHAJANI, MIHA HUMAR:Heartwood and sapwood features of Sorbus torminalis grown in iranian forests. 195doi.org/10.37763/wr.1336-4561/65.2.1952043. VLADIMIR IHNAT, HENRICH LÜBKE, JOZEF BALBERCAK, VLADIMÍR KUŇA:Size reduction downcycling of waste wood. Review. 205doi.org/10.37763/wr.1336-4561/65.2.2052204. XIANQING XIONG, YITING NIU, QINGRU MA, YUTING PAN:Study on the warm-cool and dry-wet feeling of straw board surface. 221doi.org/10.37763/wr.1336-4561/65.2.2212305. OSMAN CAMLIBEL, MEHMET AKGUL:Mechanical and physical properties of medium density fibreboard with calcite additive. 231doi.org/10.37763/wr.1336-4561/65.2.2312446. XIAOJUN YANG, QI ZHAO, DAN HAO, JIAYANG WANG, SHUAI FU, LAN MA:Flexural behavior of osb reinforced wood truss. 245doi.org/10.37763/wr.1336-4561/65.2.2452567. JOZEF MARTINKA, TOMÁŠ ŠTEFKO, IGOR WACHTER, PETER RANTUCH:Impact of electrical cables embedded into oriented strand board on critical heat flux. 257doi.org/10.37763/wr.1336-4561/65.2.2572708. BIN NA, HAIQING WANG, TAO DING, XIAOLING LU:Influence of wet and dry cycle on properties of magnesia-bonded wood-wool panel. 271doi.org/10.37763/wr.1336-4561/65.2.2712829. ELVIRA KHANOVA, VLADIMIR KONOVALOV, AZAT TIMERYANOV REGINA ISYANYULOVA, DINA RAFIKOVA:Genetic and selection assessment of the scots pine (Pinus sylvestris L.) in forest seed orchards. 283doi.org/10.37763/wr.1336-4561/65.2.28329210. BO-HAN XU, KE LIU, ABDELHAMID BOUCHAÏR:Mechanical properties and set recovery of compressed poplar with glycerin pretreatment. 293doi.org/10.37763/wr.1336-4561/65.2.29330211. OSMAN KOMUT:Blue stain in lumber industry and losses caused by cutting methods. 303doi.org/10.37763/wr.1336-4561/65.2.30331212. YANG CHUNMEI, LIU QINGWEI, JIANG TING, SONG MINGLIANG, MA YAN, LIU JIUQING:Test analysis and verification of the influence of milling cutter blade shape on wood milling. 313doi.org/10.37763/wr.1336-4561/65.2.31332213. ABDOULLAH NAMDAR:Timber column seismic response design. 323doi.org/10.37763/wr.1336-4561/65.2.32333414. PEIXING WEI, BRAD JIANHE WANG, ZHONG LI, RONGHUA JU:Development of cross-laminated timber (CLT) products from stress graded canadian hem-fir. 335doi.org/10.37763/wr.1336-4561/65.2.33534615. SINN GERHARD, JÜRGEN MAIERHOFER, DIETER LOIDL, STEPHAN PUCHEGGER, STEFANIE STANZL-TSCHEGG:Elastic constants of six wood species measured with the resonant beam technique. 347doi.org/10.37763/wr.1336-4561/65.2.347352 |