Articles

WOOD RESEARCH Volume 66, Number 2, 2021
Matshidiso Makhalema, Percy Hlangothi, SETUMO VICTOR MOTLOUNG, LEHLOHONOLO FORTUNE KOAO, and TSHWAFO ELIAS MOTAUNG

Influence of kraft lignin on the properties of rubber composites

The influence of lignin content on reclaimed rubber (RR)/natural rubber (NR) blend composite properties has successfully been studied. Scanning electron microscopy (SEM) were used to understand morphology. Fourier-transform infrared spectroscopy (FTIR) for the possible chemical interaction, whereas thermogravimetric analysis (TGA) and tensile tester were used to predict strength and elongation for possible practical applications. The results indicated that the presence of lignin forms cavities which seemed to arise from complex interactions of the blend with the lignin. Those cavities dominated tensile fractured surface and the increase in lignin indicated inconsistencies of interfacial interactions. Lignin RR/NR blend composites revealed a drop in tensile strength and shift in glass transition temperature, except for the highest lignin containing blend composite. More active interactive constituent of the blend appeared to be NR. The interaction has not favored the thermal stability and crosslinking density.

WOOD RESEARCH Volume 66, Number 2, 2021
Yan Yang, He Sun, Shuang Yang, Aifeng Wang, Rui Zhao, Wei Wang, Yiming He, Bin Li, Binxin Zhang, and Qian Wu

Internal cause analysis of damage of wooden components in danxia temple ancient architectures: Tree species

In the study, part of degraded wooden components of Danxia Temple ancient architectures in China were indentified through the bright field microscope, and chemical compositions in cell walls were observed using polarized and fluorescence lights, respectively. The results showed that samples were belonged to Quercus spp., Ulmus spp., Salix spp., and Populus spp., respectively. Cellulose composition in Quercus spp. was seriously consumed by brown decay fungi, cellulose and lignin compositions in Ulmus spp. were consumed by white decay fungi under polarized and fluorescence light observations. All of these four kind of tree species themselves were easily vulnerable to be attacked by insects.

WOOD RESEARCH Volume 66, Number 2, 2021
Abdurrahman Karaman, Mehmet Nuri Yildirim, and Onder Tor

Bending characteristics of laminated wood composites constructed with black pine wood and aramid fiber reinforced fabric

The aim of this study was to determine the 4-point bending strength and modulus of elasticity in bending of Black pine wood laminated materials reinforced with aramid fiber was bonded using epoxy or polyurethane glues separately. The samples were prepared in accordance with the TS 5497 EN 408 (2006). The results of the study determined that the highest value for static bending strength was found in the laminated wood samples (83.94 N.mm-2) that were prepared using inter-layer aramid fiber reinforced polymer (AFRP) and epoxy glue. The highest value of modulus of elasticity in bending was found in the samples prepared with inter-layer epoxy and AFRP (10311.62 N.mm-2). It was observed that the samples parallel to the glue line of the laminated material showed higher performance compared to those perpendicular to the glue line. The data obtained as a result of this study demonstrated that aramid fiber reinforced Black pine wood laminated materials can be used in the building industry as building materials.

WOOD RESEARCH Volume 66, Number 2, 2021
Tianxing Zhang and WENGANG HU

Numerical study on effects of tenon sizes on withdrawal load capacity of mortise and tenon joint

The effect of tenon length and tenon width on withdrawal load capacity of mortise and tenon (M-T) joint was studied based on the finite element method (FEM), and the relationship of withdrawal load capacity relating to tenon length and tenon width was regressed using response surface method. The results showed that the tenon length and tenon width had remarkable effects on withdrawal load capacity of M-T joint T-shaped sample. The effect of tenon length on withdrawal load capacity was greater than tenon width. The regression equation used to predict the withdrawal load capacity was capable of optimizing the tenon sizes of M-T joint with R-square of 0.926. Using FEM can get more knowledge of M-T joint visually, and reduce the costs of materials and time of experiments.