Development of bonding strength of modified birch veneers during adhesive curing
This study investigated the bonding strength development of furfurylated, N-methylol melamine (NMM) modified and thermally treated birch veneers glued with hot curing phenol formaldehyde (PF) adhesive in different pressing (20, 160 s) and open assembly times (20 s, 10 min). For testing, the automated bonding evaluation system ABES was used with 2 N.mm-2 applied pressure at 130°C. The bonding strength of both modified and unmodified samples increased significantly by prolongation of the pressing time from 20 to 160 s in all cases and for both open assembly times. A deviation was observed for the samples treated at 220°C and at 20 s open assembly time. With the exception of NMM modified veneers, bonding strength did not change significantly by increasing the assembly time in the case of 20 s pressing for both modified and unmodified samples. At 160 s pressing time, extension of the assembly time developed a better bonding for controls, NMM modified and thermally treated veneers at 180°C. The combination of 10 min assembly time and 160 s pressing time proved as the optimal bonding condition for controls, NMM modified and thermally treated veneers at 180°C while the highest bonding strength was noted in 20 assembly time and 160 s pressing time for furfurylated veneers. In most of the cases modification affected negatively the bonding performance of the veneers, in particular for furfurylated and NMM modified samples.