WOOD RESEARCH Volume 61, Number 5, 2016
Kuňa Vladimír, Balberčák Jozef, Elena Opálená, Pažitný Andrej, Albert Russ, and Jiří Schwartz

The effect of multi-component retention systems on the properties of the paper suspensions

This study presents the influence of retention reagents and multi-component retention systems on properties of pulp suspension which is used during toilet paper production. The following relationships were evaluated: influence of retention systems on rate of pulp suspension water drainage, values of specific cationic and anionic demand, Zeta potential of fibers, WRV values of fibers and water turbidity. The best results were achieved from applying three-component retention system which consisted of micro-milled bentonite Hydrocol OT, modified cationic polyethylenimin Polymín SK and cationic polyacrylamide Percol 830. The above mentioned three-component retention system resulted in increased rate of pulp suspension drainage by 43 %, improvement of water turbidity by 50 % and decrease of specific cationic demand by 33 %. The proposed retention system resulted in improved values of WRV pulp suspensions, which led to decrease of values by about 10 %. Influence of three-component retention system resulted only in minimal decrease of Zeta potential values for fibers.

WOOD RESEARCH Volume 62, Number 2, 2017
Pažitný Andrej, Boháček Štefan, Peter Medo, Balberčák Jozef, Jiří Schwartz, Kuňa Vladimír, and VLADIMÍR IHNÁT

Possibilities of removing condensate from a heat recovery unit utilizable in paper industry

Methods, processes and equipments currently used for heat recovery systems are very diverse in different branches of industry including paper industry. A very important process applied in heat recovery units is condensate removal from the heat recovery units because of optimization of the heat recovery process and extending the working life of heat recovery units. Using of heat recovery units with condensate removal in paper industry fits the innovation trends and means heat energy saving that can be realized by increase of heat recovery efficiency. Heat recovery system with condensate removal should be installed near a drying cover of a paper machine due to reduction of heat loss and pipeline length. Integration of designed spiral heat recovery unit with condensate removal into the existing dryer section of paper machine in a paper mill will lead to decrease of heat consumption and increase heat recovery efficiency up to 91.7 %.