The effect of thermal modification by hot pressing on the some physical and mechanical properties in rubberwood (Hevea brasiliensis)
Rubberwood (Hevea brasiliensis) was thermal modified by hot pressing in an open system at three different temperatures (170, 185, 200°C) and two different durations (1.5, 3 h), and the effect on the physical and mechanical properties was studied. Results show that the thermal modification increased the oven-dried density and decreased the EMC (equilibrium moisture content) by 7.93% and 37.15%, respectively, and the dimensions stability was improved. Hardness, bending strength, modulus of bending and compressive strength parallel to grain of modified samples basically decreased with increasing temperature and time, but they showed a meaningful increase compared to control samples. However, impacting bending and nail withdrawal resistance decreased after hot pressing and thermal treatment, and the failure of the compensation for the impairment was the rubberwood hot pressed and thermal treated in the presence of air, and the participation of oxygen provoked rapid degradation reactions during the treatment.