Assessment of Smartphone-Based 3D Scanning as an Alternative to Xylometry for Measuring Small, Irregular Wood Pieces Generated during Harvesting

This study evaluates the applicability of smartphone-based 3D scanning for measuring small, irregular wood pieces generated by felling notches in windthrown Norway spruce (Picea abies L.) stands. A total of 114 notch pieces were measured using both a conventional xylometric method and a smartphone-based 3D scanning method. The volumes obtained by the two methods showed an exceptionally strong correlation (r = 0.9993) and excellent absolute agreement (ICC = 0.9992). The Bland–Altman analysis indicated 95% relative limits of agreement of −15.36% to +25.20%, together with a significant proportional bias. The total notch loss index was 0.186% using xylometry and 0.184% using 3D scanning. The regression analysis showed that notch height was the only significant predictor of the loss index. The results indicate that smartphone-based 3D scanning is a promising method for estimating the volume of small and irregular wood pieces, although its interchangeability with xylometry requires predefined acceptable measurement limits.

Experimental investigation of cracked end-notched glulam beams repaired with GFRP bars

In this paper, an experimental research on bending behaviour of end-notched glulam beams and their bending behaviour after repairing with glass fibre reinforced polymer (GFRP) bars is presented. Altogether five glulam beams (100 x 220 x 4000 mm) made of spruce timber classified in the strength class C22 were tested. Experiment showed that originally, the beams failed in a brittle manner due to crack opening and its propagation. Cracks in the notch details were a result of excessive tensile stresses perpendicular to grain and shear stresses. Repairing the beams with GFRP bars after their failure completely restored and notably improved their load carrying capacity (average increase of 194%). Failure mechanism after repair changed from the original brittle tensile failure to more ductile failure in bending for most beams, proving the successfulness of the intervention. This study gives an insight in rehabilitation and repair possibilities of existing structures using advanced materials like GFRP bars.